Service Guide

Hardware Installations and Upgrades
24 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
Figure 22. Removing the Front Bezel
Installing the Front Bezel (Pedestal Only)
1. Fit the right edge of the bezel assembly against the right side of the chassis.
2. Engage the plastic bezel hooks (see letter A) into the raised metal slots at the chassis edge.
3. Rotate the bezel assembly toward the chassis.
4. Latch the two plastic tabs (see letter B) on the left side of the bezel assembly to the chassis.
Figure 23. Installing the Front Bezel