Service Guide

Appendix A: Technical Reference
220 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
Parameter
Limits
Acoustics Sound
Power Measured
Power in Watts <300 W ≥300 W ≥600 W ≥1000 W
Servers/Rack
Mount BA
7.0 7.0 7.0 7.0
Note:
1. Intel Corporation server boards contain a number of high-density VLSI and power delivery components that need
adequate airflow to cool. Intel
®
ensures through its own chassis development and testing that when Intel
®
server
building blocks are used together, the fully integrated system will meet the intended thermal requirements of these
components. It is the responsibility of the system integrator who chooses not to use Intel
®
developed server building
blocks to consult vendor datasheets and operating parameters to determine the amount of airflow required for their
specific application and environmental conditions. Intel Corporation cannot be held responsible, if components fail or
the server board does not operate correctly when used outside any of its published operating or non-operating limits.
/
DISCLAIMER NOTE
Intel
®
ensures the unpackaged server board and system meet the shock requirement mentioned above
through its own chassis development and system configuration. It is the responsibility of the system
integrator to determine the proper shock level of the board and system if the system integrator chooses
different system configuration or different chassis. Intel Corporation cannot be held responsible if
components fail or the server board does not operate correctly when used outside any of its published
operating or non-operating limits.