Service Guide

BIOS Setup Utilities
216 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
Comments: Selection only. Position to this line and press the <Enter> key to save the
current state of the settings for all BIOS parameters as a customized set of “User Default Values”.
These are a user-determined set of BIOS default settings that can be used as an alternative instead
of the initial factory settings (“failsafe” settings) for all BIOS parameters.
By changing the BIOS settings to values that the user prefers to have for defaults, and then using
this operation to save them as “User Default Values”, that version of BIOS settings can be
restored at any time by using the following “Load User Default Values” operation.
There will be a confirmation popup to verify that the user really intended to take this action.
Loading the “factory default” values with F9 or the “Load Default Values” – or by any other
means – does not affect the User Default Values. They remain set to whatever values they were
saved as.
7. Load User Default Values
Option Values: <None>
Help Text:
Load the User Default Values to all the setup options.
Comments: Selection only. Position to this line and press the <Enter> key to load
User Default Values for all BIOS settings. These are user-customized BIOS default settings for
all BIOS parameters, previously established by doing a “Save User Defaults” action (see above).
There will be a confirmation popup to verify that the user really intended to take this action.