Service Guide

BIOS Setup Utilities
Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide 195
Option Values: [Entry Field, 2-63 characters]
Help Text:
View/Edit BMC DHCP host name. Press <Enter> to edit. Host name should start with an
alphabetic, remaining can be alphanumeric characters. Host name length may be from 2
to 63 characters.
Comments: This field is active and may be edited whenever at least one of the IP
Source or IPv6 Source options is set to Dynamic. This is the name of the DHCP Host from
which dynamically assigned IPv4 or IPv6 addressing parameters are acquired.
The initial value for this field is supplied from the BMC, if there is a DHCP Host available. The
user can edit the existing Host or enter a different DHCP Host Name.
If none of the IP/IPv6 Source fields is set to Dynamic, then this BMC DHCP Host Name field
will be grayed out and inactive.
20. User ID
Option Values: anonymous
root
User3
User4
User5
Help Text:
Select the User ID to configure: User1 (anonymous), User2 (root), and User3/4/5 are
supported.
Comments: These 5 User IDs are fixed choices and cannot be changed. The BMC
supports 15 User IDs natively, but only the first 5 are supported through this interface.
21. Privilege
Option Values: Callback
User
Operator
Administrator
Help Text:
View/Select user privilege. User2 (root) privilege is "Administrator" and cannot be
changed.
Comments: The level of privilege that is assigned for a User ID affects which
functions that user may perform.
22. User Status