Service Guide

BIOS Setup Utilities
Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide 155
Comments: This will enable or disable Port<x, x = 1-4> of Onboard Network Controller<n, n =
1-2>, including associated Port PXE options. The NIC<n> Port<x> PXE option and MAC*
Address display will not appear when that port is disabled.
The associated port enable/disable options will not appear when NIC<n> is disabled.
Only ports which actually exist for a particular NIC will appear in this section. That is, Port1-
Port4 will appear for a quad-port NIC, Port1-Port2 will appear for a dual-port NIC, and only
Port1 will appear for a single-port NIC.
Network controllers installed on an IO Module do not have a port disabling function that is
controlled by BIOS, so there are no corresponding options for IO Module NICs.
For details about the NIC port configuration for a specific board, see the Technical Product
Specification for that board.
26. NIC1 Port1 PXE
27. NIC1 Port2 PXE
28. NIC1 Port3 PXE
29. NIC1 Port4 PXE
30. NIC2 Port1 PXE
31. NIC2 Port2 PXE
32. NIC2 Port3 PXE
33. NIC2 Port4 PXE
34. IOM1 Port1 PXE
35. IOM1 Port2 PXE
36. IOM1 Port3 PXE
37. IOM1 Port4 PXE
38. IOM2 Port1 PXE
39. IOM2 Port2 PXE
40. IOM2 Port3 PXE
41. IOM2 Port4 PXE
Option Values: Enabled
Disabled
Help Text:
Enable/Disable Onboard/IOM NIC Port PXE Boot