Service Guide

BIOS Setup Utilities
Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide 151
This 1GbE PXE option does not appear unless there is a 1 GbE NIC installed in the system as an
Onboard or IO Module NIC.
3. PXE 10GbE Option ROM
Option Values: Enabled
Disabled
Help Text:
Enable/Disable Onboard/IOM NIC PXE Option ROM Load.
Comments: This selection is to enable/disable the 10GbE PXE Option ROM that is used by all
Onboard and IO Module 10 GbE controllers.
This option is grayed out and not accessible if the discs Option ROM is enabled or the 10 GbE
FCoE Option ROM is enabled. It can co-exist with the 1 GbE PXE Option ROM or with an
InfiniBand* controller Option ROM.
If the 10GbE PXE Option ROM is disabled, and no other Option ROM is enabled, the system
cannot perform a Network Boot and cannot respond for Wake-on-LAN.
This 10GbE PXE option does not appear unless there is a 10 GbE NIC installed in the system as
an Onboard or IO Module NIC.
4. FCoE 10GbE Option ROM
Option Values: Enabled
Disabled
Help Text:
Enable/Disable Onboard/IOM NIC FCoE Option ROM Load.
Comments: This selection is to enable/disable the 10GbE FCoE Option ROM that is
used by all Onboard and IO Module 10 GbE controllers capable of FCoE support. At the present
time, only the Intel
®
82599 10 Gigabit SFP+ NIC supports FCoE for this family of server boards.
This option is grayed out and not accessible if the 10GbE PXE Option ROM is enabled or if the
discs Option ROM is enabled. It can co-exist with the 1GbE PXE Option ROM or with an
InfiniBand* controller Option ROM.
If the FCoE Option ROM is disabled, and no other Option ROM is enabled, the system cannot
perform a Network Boot and cannot respond for Wake-on-LAN.
This FCoE option does not appear unless there is a FCoE-capable 10GbE NIC installed in the
system as an Onboard or IO Module NIC.
5. Discs 1GbE/10GbE Option ROM