Service Guide

Hardware Installations and Upgrades
90 Intel
®
Server System P4000IP and Intel
®
Workstation System P4000CR Service Guide
5. Remove the air duct if it is installed.
6. Disconnect the front panel cable, USB cable from the server board,
Figure 124. Disconnecting the Cables from the Server Board
7. Loosen the front panel cable and USB cable from the wire clip on chassis.
8. Press the latch at the sides of the front panel (see Letter A) and carefully slide the front panel out
(see Letter B).
CAUTION
Do not slide the front panel out far from the front of the chassis before you disconnect
the instruction cable from the front panel board.
Figure 125. Sliding the Front Panel Tray out from the Chassis