Technical Product Specification

Intel® Server System R2000IP Product Family TPS Thermal and Acoustic Management
Revision 1.1
37
4.2.6 Fan and HDD Configuration
The Intel
®
Server System R2000IR consists six 60x38mm system fans providing cooling for all
ingredients inside the enclosure.
All the fans are Pulse Width Modulated (PWM) 4 wire/pin fans. The fan headers are connected
to motherboard with below sequence. Misconnect will potentially lead to thermal risk or
undesired acoustic.
 SYS FAN 1 Header #1 connect to one 60x38mm system fan
 SYS FAN 2 Header #1 connect to one 60x38mm system fan
 SYS FAN 3 Header #1 connect to one 60x38mm system fan
 SYS FAN 4 Header #1 connect to one 60x38mm system fan
 SYS FAN 5 Header #1 connect to one 60x38mm system fan
 SYS FAN 6 Header #1 connect to one 60x38mm system fan
 CPU 1 FAN connect reserved
 CPU 2 FAN connect reserved
 REAR FAN reserved
The Intel
®
Server System R2000IR supports up to 12x3.5'' HDDs and 24x2.5'' HDDs.
Figure 22. System Overview for Thermal Management
Note: If Quiet Fan Idle Mode is enabled, with combination of Altitude set to [300m or less] or
[301m-900m] and Fan Profile set to [Acoustic] mode, the core fan will stop running when the
aggregate sensor temperatures are satisfied indicating the system is at good thermal/light
loading conditions. For other scenarios, the core fan will maintain a minimum RPM.
4.2.7 Acoustic
The Intel
®
Server System R2000IR acoustic is measured with typical configuration and typical
operating working conditions.
System Configuration
System SKU
1,2
CPU
135W (2x)
Memory
DRx8 (16x)