Technical Product Specification

Intel® Server Board S2600IP and Intel® Workstation Board W2600CR TPS Functional Architecture
Revision 1.4 Intel order number G34153-004 43
3.5.1 Network Interface
Network connectivity is provided by means of an onboard Intel
®
Ethernet Controller 1350-AM4
providing up to four 10/100/1000 Mb Ethernet ports.
On the Intel
®
Server Board S2600IP, four external 10/100/1000 Mb RJ45 Ethernet ports are
provided. On the Intel
®
Workstation Board W2600CR, two external 10/100/1000 Mb RJ45
Ethernet ports are provided. Each Ethernet port drives two LEDs located on each network
interface connector. The LED at the right of the connector is the link/activity LED and indicates
network connection when on, and transmit/receive activity when blinking. The LED at the left of
the connector indicates link speed as defined in the following table.
LED Color
LED State
NIC State
Green/Amber (Right)
Off
10 Mbps
Amber
100 Mbps
Green
1000 Mbps
Green (Left)
On
Active Connection
Blinking
Transmit/Receive activity
Figure 22. External RJ45 NIC Port LED Definition
3.6 I/O Module Support
*IO Model is not available for Intel
®
Server Board S2600IP4L and Intel
®
Workstation Board
W2600CR2L.
To broaden the standard on-board feature set, the server board supports the option of adding a
single I/O module providing external ports for a variety of networking interfaces. The I/O module
attaches to a high density 80-pin connector on the server board labeled “IO_Module”.
Supported I/O modules include: