Technical Product Specification

Product Family Overview Intel® Server System R2000IP Product Family TPS
4 Revision 1.1
2.1 System Dimensions
Table 2. Dimensional Data
Std.- inches
Metric - mm
Height
3.34
87.63
Width without rails
17.244
438.0
Width with rails
17.716
450.0
Depth without CMA*
32.0
812.8
Depth with CMA
35.0
889.0
Maximum Weight (Fully Integrated)
52 lbs
23.6 Kg (ref)
*Cable Management Arm
2.2 System Level Environmental Limits
The following table defines the Intel
®
Server System R2000IP system level operating and non-
operating environmental limits. Operation of the Intel
®
Server System R2000IP at conditions
beyond those shown in the following table may cause permanent damage to the system.
Optional I/O Module
Support
The following I/O modules utilize a single proprietary on-board connector. An installed I/O module
can be supported in addition to standard on-board features and any add-in expansion cards.
 4-port 10/100/1000 Ethernet Networking module
System Fans
 Six managed system fans
 One power supply fan for each installed power supply module
Expansion Slots
 Eight (8) LP PCI cards without riser
 1 PCIe IO module connector
 1 PCIe SAS Module connector
Video
 Integrated 2D Video Controller
On-board storage
controllers and options
 One low-profile eUSB 2x5 pin connector to support low-profile eUSB solid state devices
 Two single port SATA connectors capable of supporting up to 6 GB/sec
 Two 4-port mini-SAS connectors capable of supporting up to 3 GB/sec SAS/SATA
 Intel SAS ROC module support (Optional)
 Intel
®
RAID C600 Upgrade Key support providing optional expanded SATA/SAS RAID capabilities
Security
Trusted Platform Module (Optional)
Server Management
 Integrated Baseboard Management Controller, IPMI 2.0 compliant
 Support for Intel
®
Server Management Software
 Intel
®
Remote Management Module 4 support (Optional)
 Intel
®
Remote Management Module 4 Lite support (Optional)
Power Supply Options
 750W (1+1,1+0,2+0) Hot-swap Capable
Storage Bay Options
 8x – 3.5” SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support
 12x – 3.5” SATA/SAS Hot Swap Hard Drive Bays
 8x – 2.5” SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support
 16x – 2.5” SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support
 24x – 2.5” SATA/SAS Hot Swap Hard Drive Bays
Rack Mount Kit Options
 Tool-less rack mount rail kit
 Value rack mount rail kit
 Cable Management Arm
 2-post Fixed mount bracket kit