Service Guide

Hardware Installations and Upgrades
46 Intel
®
Server System R2000GZ/GL Service Guide
1. Do one of the following:
- If a filler panel is installed, use the 'finger hole' to remove the filler panel (see letter “A”).
Figure 74. Removing the filler panel
- If a power supply is installed, push the green latch in the direction shown while pulling out
of the system by the handle.
Figure 75. Removing the power supply module
2. Do one of the following:
- Insert the power supply module into the power supply cage and push all the way until it
clicks into place (see letter “B”).
Figure 76. Installing the power supply module