Service Guide

Hardware Installations and Upgrades
54 Intel
®
Server System R2000GZ/GL Service Guide
Figure 90. Removing 2.5” hard drive backplane – remove the hard drive cage
6. Remove the screw from the backplane board (see letter “E”).
7. Hold the backplane board only by the edges and slide the backplane board in the direction
shown to release it (see letter “F”). Remove the backplane board from the four hooks and pull
out of the hard drive cage (see letter “G”).
Figure 91. Removing 2.5” hard drive backplane – remove the backplane
Installing the 2.5” Hard Drive Backplane:
1. Align the holes on the backplane board with the four hooks on the hard drive cage (see letter
“A”). Slide the backplane board in the direction shown to lock it in place (see letter “B”).
2. Secure the backplane with the screw (see letter “C”).
Figure 92. Installing 2.5” hard drive backplane – install backplane