S2600GZ and S2600GL

Table Of Contents
Intel® Server Board S2600GZ/GL TPS BIOS Setup Utility
Option Values: <Available Hard Disk devices>
Help Text:
Set system boot order by selecting the boot option for this position.
Comments: Choose the order of booting among Hard Disk devices by choosing which
available Hard Disk device should be in each position in the order.
Back to [Hard Disk Order Screen] — [Boot Options Screen
]
12.2.5.3
Floppy Order
The Floppy Order screen allows the user to control the order in which BIOS attempts to boot from the Floppy
Disk drives installed in the system. This screen is only available when there is at least one Floppy Disk
(diskette) device available in the system configuration. Note that a USB attached diskette drive or a USB Key
device formatted as a diskette drive will appear in this section.
To access this screen from the Main screen, select Boot Options > Floppy Order. To move to another
screen, press the <Esc> key to return to the Boot Options screen, then select the desired screen.
Boot Options
Floppy Order
Floppy Disk #1 <Available Floppy Disk devices>
Floppy Disk #2 <Available Floppy Disk devices>
Figure 61. Floppy Order Screen
Screen Field Descriptions:
1. Floppy Disk #1
Floppy Disk #2
Option Values: <Available Floppy Disk devices>
Help Text:
Set system boot order by selecting the boot option for this position.
Comments: Choose the order of booting among Floppy Disk devices by choosing which
available Floppy Disk device should be in each position in the order.
Back to [Floppy Order Screen] — [Boot Options Screen
]
12.2.5.4
Network Device Order
The Network Device Order screen allows the user to control the order in which BIOS attempts to boot from the
network bootable devices installed in the system. This screen is only available when there is at least one
network bootable device available in the system configuration.
To access this screen from the Main screen, select Boot Options > Network Device Order. To move to
another screen, press the <Esc> key to return to the Boot Options screen, then select the desired screen.
Revision 2.4
185