S2600GZ and S2600GL

Table Of Contents
Intel® Server Board S2600GZ/GL TPS BIOS Setup Utility
Main
Advanced
Security
Server Management
Boot Options
Boot Manager
System Boot Timeout [0 65535,
0
is default]
System Early POST Timeout 0
Boot Option #1 <Available Boot devices>
Boot Option #2 <Available Boot devices>
Boot Option <#n> <Available Boot devices>
CDROM Order
Hard Disk Order
Floppy Order
Network Device Order
BEV Device Order
Add EFI Boot Option
Delete EFI Boot Option
EFI Optimized Boot Enabled/
Disabled
Use Legacy Video for EFI OS Enabled/
Disabled
Boot Option Retry Enabled/
Disabled
USB Boot Priority
Enabled
/Disabled
Static Boot Order Enabled/
Disabled
Reset Static Boot Order Yes/
No Action
Figure 58. Boot Options Screen
Screen Field Descriptions:
System Boot Timeout
Option Values: [Entry Field 0 65535, 0 is default]
Help Text:
The number of seconds BIOS will pause at the end of POST to allow the user to press the [F2]
key for entering the BIOS Setup utility.
Valid values are 0-65535. Zero is the default. A value of 65535 causes the system to go to the
Boot Manager menu and wait for user input for every system boot.
Comments: After entering the desired timeout, press the <Enter> key to register that timeout
value to the system. These settings are in seconds. The timeout value entered will take effect on the
next boot.
This timeout value is independent of the FRB2 setting for BIOS boot failure protection. The FBR2
countdown will be suspended during the time that the Boot Timeout countdown is active.
Also, if the <Pause> key is pressed during the time that the Boot Timeout is active, the Boot Timeout
countdown will be suspended until the Pause state has been dismissed and normal POST processing
has resumed.
Back to [Boot Options Screen
]
Revision 2.4
179