R2000GZ and R2000GL

Intel
®
Server System R2000GZ/GL Product Family TPS
6.2 3.5” Drive Support
The server is available in 3.5” form factor storage device configurations of 8 and 12 devices as illustrated
below.
Label
Description
A
System Label Pull-out Tab
B
SATA Optical Drive
C
Video Connector
D
USB Ports
E
Front Control Panel
F
3.5” Hard Drive Bays
Figure 29. 3.5" Drive Bay - 8 Drive Configuration
Figure 30. 3.5” Drive Bay - 12 Drive Configuration
The drive bay can support either SATA or SAS hard disk drives or SSDs. Mixing of drive types (SAS/SATA)
within the hard drive bay is not supported. Storage device type is dependent on the type of host bus controller
used, SATA only or SAS. Each 3.5” storage device is mounted to a drive tray, allowing for hot swap extraction
and insertion. Drive trays have a latching mechanism that is used to extract and insert storage devices from
the chassis, and lock the tray in place.
Revision 2.2
45