Intel RMFBU2/SSD Mounting Bracket A2UBKTMFBUSSD Users Guide

2 Intel
®
RMFBU2/SSD Mounting Bracket A2UBKTMFBUSSD User’s Guide
5. Connect cables. Please refer to Intel
®
RAID Maintenance Free Backup Unit AXXRMFBU2
User’s Guide for detailed instruction.
To install a Solid State Drive
1. Remove the top cover from the server chassis (see instruction from the Quick Installation
User’s Guide).
2. Position the Solid State Drive on the bracket (see letter “A”).
3. Secure the Solid State Drive with the four screws (see letter “B”).
Figure 3. Install Solid State Drive to the bracket
4. Position the bracket on top of the power supply cage (see letter “C”).
5. Secure the bracket to the chassis with three screws (see letter “D”).
Note: The two 6-32 flat head screws are for the side wall and the one 4-40 screw is for the
rear panel.
Figure 4. Install the bracket to server chassis
6. Connect the cables.