Intel I/O Expansion Modules for Intel platforms hardware specification

Revision History Intel
®
I/O Expansion Modules for Intel
®
Platforms HWS
Revision History
Date
Revision
Number
Modifications
March, 2011
0.5
Initial Release.
August, 2011
0.9
Added the following sections:
 Section 2.4 – Intel
®
I350 Gb Ethernet Controller
 Section 3.4 – Intel
®
X540 10Gb Ethernet Controller
 Section 4.4 – Intel
®
82599 10Gb Ethernet Controller
 Section 5.4 - ConnectX*-3 Single/Dual-Port Adapter Silicon with VPI
 Section 6 – FDR InfiniBand* ConnectX*-3 I/O Module (AXX1FDRIOIOM)
August, 2011
0.91
Added figures for port identification.
January, 2012
1.0
Deleted Section 5 - QDR InfiniBand* ConnectX*-3 I/O Module, and added new
section for Dual Port FDR InfiniBand* ConnectX*-3 I/O Module.
November, 2012
1.1

Added AXX10GBTWLHW
 Updated Table 1
December, 2014
1.2

Added AXX10GBTWLHW2
Disclaimers
Information in this document is provided in connection with Intel
®
products. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel
®
assumes no liability whatsoever, and Intel
®
disclaims any
express or implied warranty, relating to sale and/or use of Intel
®
products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel
®
products are not intended for use in medical, lifesaving, or life sustaining applications. Intel
®
may make
changes to specifications and product descriptions at any time, without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or
"undefined." Intel
®
reserves these for future definition and shall have no responsibility whatsoever for conflicts or
incompatibilities arising from future changes to them.
This document contains information on products in the design phase of development. Do not finalize a design with
this information. Revised information will be published when the product is available. Verify with your local sales
office that you have the latest datasheet before finalizing a design.
The Intel
®
I/O Expansion Modules may contain design defects or errors known as errata which may cause the
product to deviate from published specifications. Current characterized errata are available on request.
Intel Corporation server baseboards contain a number of high-density VLSI and power delivery components that
need adequate airflow to cool. Intel
®
’s own chassis are designed and tested to meet the intended thermal
requirements of these components when the fully integrated system is used together. It is the responsibility of the
system integrator that chooses not to use Intel
®
developed server building blocks to consult vendor datasheets and
operating parameters to determine the amount of air flow required for their specific application and environmental
conditions. Intel Corporation cannot be held responsible if components fail or the server board does not operate
correctly when used outside any of their published operating or non-operating limits.
Intel and Xeon are trademarks or registered trademarks of Intel Corporation.
*Other brands and names may be claimed as the property of others.
Copyright © Intel Corporation 2014.
Revision 1.2
Intel order number: G30021-004
ii