Technical Product Specification

Intel® Server Boards S4600LH2/T2 TPS Appendix F: Supported Intel
®
Server Chassis
Revision 2.0
243
Feature
Description
 S4600LT2 - 2 RJ-45 Network Interface Connectors supporting 100/1000/10000Mbps
 USB 2.0 connectors - 4 on back panel + 2 on front panel
Internal I/O
connectors / headers

One 2x5 pin connector providing front panel support for two USB ports
 One Type-A USB 2.0 connector
 One 2x15 pin SSI-EEB compliant front panel header
 One 2x7pin Front Panel Video connector
 One DH-10 Serial Port B connector
Optional I/O Module
Support
The following I/O modules utilize a single proprietary on-board connector. An installed I/O
module can be supported in addition to standard on-board features and any add-in expansion
cards.
 AXX4P1GBPWLIOM – Quad port 1 GbE based on Intel® Ethernet Controller I350
 AXX10GBTWLIOM – Dual RJ-45 port 10GBase-T I/O Module based on Intel® Ethernet
Controller X540
 AXX10GBNIAIOM – Dual SFP+ port 10GbE module based on Intel® 82599 10 GbE
controller
 AXX1FDRIBIOM – Single Port FDR 56GT/S speed InfiniBand module with QSFP
connector
 AXX2FDRIBIOM – Dual port FDR 56GT/S speed Infiniband module with QSFP connector
System Fans

Eleven managed system fans
 One power supply fan for each installed power supply module
Riser Cards
Two riser card slots.
 Each riser card slot has a total of 48 PCIe lanes routed to them
Each riser card slot has support for various Full Height Full Length (FHFL) and Full Height
Half Length (FHHL) cards
Video
 Integrated 2D Video Controller
 16 MB DDR3 Memory
On-board storage
controllers and
options

One low-profile eUSB 2x5 pin connector to support low-profile eUSB solid state devices
 Two single port SATA connectors capable of supporting up to 6 GB/sec
 Two 4-port mini-SAS connectors capable of supporting up to 3 GB/sec SAS/SATA
 Intel
®
RAID C600 Upgrade Key support providing optional expanded SATA/SAS RAID
capabilities
Security
Trusted Platform Module (Optional)
Server Management
 Integrated Baseboard Management Controller, IPMI 2.0 compliant
 Support for Intel
®
Server Management Software
 Intel
®
Remote Management Module 4 support (Optional)
 Intel
®
Remote Management Module 4 Lite support (Optional)
Power Supply
Options
The system is shipped with two power supplies with support below options.
 1600W (1+1) Redundant Hot-swap Capable
 1600W (1+0 or 2+0) Non-Redundant
Storage Bay Options
 4" x 3.5" SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support
 8" x 2.5" SATA/SAS Hot Swap Hard Drive Bays
Rack Mount Kit
Options

Premium rack mount rail kit (AXXPRAIL)