Technical Product Specification

Intel® Server Boards S4600LH2/T2 TPS
Revision 2.0
210
Comments: Selection only. Position to this line and press the <Enter> key to exit Setup with
any changes in BIOS settings saved. If there have been no changes made in the settings, the BIOS will
resume executing POST.
If changes have been made in BIOS settings, a confirmation pop-up will appear. If the “Save Changes
& Exit” action is positively confirmed,, any persistent changes will applied and saved to the BIOS
settings in NVRAM storage, then the system will reboot if necessary (which is normally the case). If the
“Save Changes & Exit” action is not confirmed, BIOS will resume executing Setup.
The <F10 > function key may also be used from anyplace in Setup to initiate a “Save Changes & Exit”
action.
Back to [Save & Exit Screen
]
2. Discard Changes and Exit
Option Values: <None>
Help Text:
Exit BIOS Setup Utility without saving changes.
The [Esc] key can also be used.
Comments: Selection only. Position to this line and press the <Enter> key to exit Setup
without saving any changes in BIOS settings. If there have been no changes made in the settings, the
BIOS will resume executing POST.
If changes have been made in BIOS settings, a confirmation pop-up will appear. If the “Discard
Changes & Exit” action is positively confirmed,, all pending changes will be discarded and BIOS will
resume executing POST. If the “Discard Changes & Exit” action is not confirmed, BIOS will resume
executing Setup without discarding any changes.
The <Esc > key may also be used in Setup to initiate a “Discard Changes & Exit” action.
Back to [Save & Exit Screen]
3. Save Changes
Option Values: <None>
Help Text:
Save Changes made so far to any of the setup options.
Comments: Selection only. Position to this line and press the <Enter> key to save any
pending changes in BIOS settings. If there have been no changes made in the settings,
Also, the user should be aware that most changes require a reboot to become active. If changes have
been made and saved, without exiting Setup, the system should be rebooted later even if no additional
changes are made.
Back to [Save & Exit Screen]
4. Discard Changes
Option Values: <None>
Help Text:
Discard Changes made so far to any of the setup options.