Technical Product Specification

Intel® Server Boards S4600LH2/T2 TPS
Revision 2.0
189
When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The setting of IP
Source determines whether this field is display-only (when Dynamic) or can be edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
Back to [BMC LAN Configuration Screen] — [Server Management Screen
]
4. IPv6
Option Values: Enabled
Disabled
Help Text:
Option to Enable/Disable IPv6 addressing and any IPv6 network traffic on these channels.
Comments: The initial value for this field is acquired from the BMC. It may be changed in
order to switch between IPv4 and IPv6 addressing technologies.
When this option is set to Disabled, all other IPv6 fields will not be visible for the Baseboard LAN and
Intel
®
RMM4 DMN (if installed). When IPv6 addressing is Enabled, all IPv6 fields for the Baseboard
LAN and Intel
®
RMM4 DMN will become visible, and all IPv4 fields will be grayed out and inactive.
Back to [BMC LAN Configuration Screen] — [Server Management Screen
]
5. IPv6 Source
Option Values: Static
Dynamic
Auto
Help Text:
Select BMC IPv6 source: If [Static], IPv6 parameters may be edited. If [Dynamic], these fields
are display-only and IPv6 address is acquired automatically (DHCP). If [Auto], these fields are
display-only and IPv6 address is acquired using ICMPv6 router/neighbor discovery.
Comments: This specifies the IP Source for IPv6 addressing for the Baseboard LAN
configuration. There is a separate IPv6 Source field for the Intel
®
RMM4 LAN configuration.
This option is only visible when the IPv6 option is set to Enabled.
When IPv6 addressing is Enabled, the initial value for this field is acquired from the BMC, and its
setting determines whether the other Baseboard LAN IPv6 addressing fields are display-only (when
Dynamic or Auto) or can be edited (when Static).
Back to [BMC LAN Configuration Screen] — [Server Management Screen
]
6. IPv6 Address
Option Values: [Entry Field 0000.0000.0000.0000.0000.0000.0000.0000,
0000.0000.0000.0000.0000.0000.0000.0000 is default]
Help Text:
View/Edit IPv6 address. Press <Enter> to edit. IPv6 addresses consist of 8 hexadecimal 4 digit
numbers separated by colons.
Comments: This specifies the IPv6 Address for the Baseboard LAN. There is a separate IPv6
Address field for the Intel
®
RMM4 LAN configuration.
This option is only visible when the IPv6 option is set to Enabled.
When IPv6 addressing is used, the initial value for this field is acquired from the BMC. The setting of
IPv6 Source determines whether this field is display-only (when Dynamic or Auto) or can be edited
(when Static).
Back to [BMC LAN Configuration Screen] — [Server Management Screen
]