Technical Product Specification

Intel® Server Boards S4600LH2/T2 TPS
Revision 2.0
167
Comments: If the USB controller setting is Disabled, this field is grayed out and inactive.
Back to [USB Configuration Screen]
7. Mass Storage Devices:
Option Values: Auto
Floppy
Forced FDD
Hard Disk
CD-ROM
Help Text:
[Auto] - USB devices less than 530 MB are emulated as floppies.
[Forced FDD] - HDD formatted drive is emulated as an FDD (for example, ZIP drive).
Comments: This field is hidden if no USB Mass Storage devices are detected.
This setup screen can show a maximum of eight USB Mass Storage devices on the screen. If more
than eight devices are installed in the system, the ‘USB Devices Enabled’ displays the correct count,
but only the first eight devices discovered are displayed in this list.
If the USB controller setting is Disabled, this field is grayed out and inactive.
Back to [USB Configuration Screen]
12.2.2.10 System Acoustic and Performance Configuration
The System Acoustic and Performance Configuration screen allows the user to configure the thermal control
behavior of the system with respect to what parameters are used in the system’s Fan Speed Control
algorithms.
To access this screen from the Main screen, select Advanced > System Acoustic and Performance
Configuration. To move to another screen, press the <Esc> key to return to the Advanced screen, then
select the desired screen.
Advanced
System Acoustic and Performance Configuration
Set Throttling Mode
Auto/DCLTT/SCLTT/SOLTT
Altitude
300m or less/301m-900m/901m – 1500m/Higher than 1500m
Set Fan Profile
Performance/Acoustic
Fan PWM Offset
[0 – 100, 0 is default]
Quiet Fan Idle Mode
Enabled/Disabled
Figure 41. System Acoustic and Performance Configuration
Screen Field Descriptions:
Set Throttling Mode