Technical Product Specification

Intel® Server Boards S4600LH2/T2 TPS
Revision 2.0
165
 A USB Key formatted as a CDROM drive will be recognized as an HDD.
 A USB Key formatted without a Partition Table will be forced to FDD emulation.
 A USB Key formatted with one Partition Table, and less than 528 MB in size, will be forced to FDD
emulation – otherwise if it is 528 MB or greater in size, it will be forced to HDD emulation.
Note: USB devices can be “hotplugged” during POST, and will be detected and “beeped”. They will be
enumerated and displayed on this screen, though they may not be enumerated as bootable devices.
Advanced
USB Configuration
Detected USB Devices
<Number of USB devices detected in system>
USB Controller
Enabled/Disabled
Legacy USB Support
Enabled/Disabled/Auto
Port 60/64 Emulation
Enabled/Disabled
Make USB Devices Non-Bootable
Enabled/Disabled
USB Mass Storage Device Configuration
Device Reset Timeout
10 seconds/20 seconds/30 seconds/40 seconds
Mass Storage Devices:
<Mass storage devices one line per device>
Auto/Floppy/Forced FDD/Hard Disk/CD-ROM
Figure 40. USB Configuration Screen
Screen Field Descriptions:
1. Detected USB Devices
Option Values: <Number of USB devices detected in system>
Help Text: <None>
Comments: Information only. Displays the total number of USB devices of all types which
have been detected in POST.
Back to [USB Configuration Screen]
2. USB Controller
Option Values: Enabled
Disabled
Help Text:
[Enabled] - All on-board USB controllers are turned on and accessible by the OS.
[Disabled] - All on-board USB controllers are turned off and inaccessible by the OS.