Technical Product Specification

Intel® Server Boards S4600LH2/T2 TPS
Revision 2.0
164
3. IRQ
Option Values: 3
4
Help Text:
Select Serial port A interrupt request (IRQ) line.
Comments: Legacy IRQ. This field should not appear when Serial A port enable/disable does
not appear.
Back to [Serial Port Configuration Screen
]
4. Serial B Enable
Option Values: Enabled
Disabled
Help Text:
Enable or Disable Serial port B.
Comments: Serial Port B can be used for Serial Console Redirection. SOL cannot be routed
to Serial B.
Back to [Serial Port Configuration Screen
]
5. Address
Option Values: 3F8h
2F8h
3E8h
2E8h
Help Text:
Select Serial port B base I/O address.
Comments: Legacy I/O port address.
Back to [Serial Port Configuration Screen
]
6. IRQ
Option Values: 3
4
Help Text:
Select Serial port B interrupt request (IRQ) line.
Comments: Legacy IRQ
Back to [Serial Port Configuration Screen
]
12.2.2.9 USB Configuration
The USB Configuration screen allows the user to configure the available USB controller options.
To access this screen from the Main screen, select Advanced > USB Configuration. To move to another
screen, press the <Esc> key to return to the Advanced screen, then select the desired screen.
This screen should display all USB Mass Storage devices which have been detected in the system. These
include USB-attached Hard Disk Drives (HDDs), Floppy Disk Drives (FDDs), CDROM and DVDROM drives,
and USB Flash Memory devices (USB Key, Keyfob, and so on).
Each USB Mass Storage device may be set to allow the media emulation for which it is formatted, or an
emulation may be specified. For USB Flash Memory devices in particular, there are some restrictions: