Technical Product Specification

Intel® Server Boards S4600LH2/T2 TPS
Revision 2.0
158
2. PXE 1GbE Option ROM
Option Values: Enabled
Disabled
Help Text:
Enable/Disable Onboard/IOM NIC PXE Option ROM Load.
Comments: This selection is to enable/disable the 1GbE PXE Option ROM that is used by all
Onboard and IO Module 1 GbE controllers.
This option is grayed out and not accessible if the discs Option ROM is enabled. It can co-exist with the
10 GbE PXE Option ROM, the 10 GbE FCoE Option ROM, or with an Infiniband* controller Option
ROM.
If the 1GbE PXE Option ROM is disabled, and no other Option ROM is enabled, the system cannot
perform a Network Boot and cannot respond for Wake-on-LAN.
This 1GbE PXE option does not appear unless there is a 1 GbE NIC installed in the system as an
Onboard or IO Module NIC.
Back to [NIC Configuration Screen] — [PCI Configuration Screen] — [Advanced Screen
]
3. PXE 10GbE Option ROM
Option Values: Enabled
Disabled
Help Text:
Enable/Disable Onboard/IOM NIC PXE Option ROM Load.
Comments: This selection is to enable/disable the 10GbE PXE Option ROM that is used by
all Onboard and IO Module 10 GbE controllers.
This option is grayed out and not accessible if the discs Option ROM is enabled or the 10 GbE FCoE
Option ROM is enabled. It can co-exist with the 1 GbE PXE Option ROM or with an Infiniband*
controller Option ROM.
If the 10GbE PXE Option ROM is disabled, and no other Option ROM is enabled, the system cannot
perform a Network Boot and cannot respond for Wake-on-LAN.
This 10GbE PXE option does not appear unless there is a 10 GbE NIC installed in the system as an
Onboard or IO Module NIC.
Back to [NIC Configuration Screen] — [PCI Configuration Screen] — [Advanced Screen
]
4. FCoE 10GbE Option ROM
Option Values: Enabled
Disabled
Help Text:
Enable/Disable Onboard/IOM NIC FCoE Option ROM Load.
Comments: This selection is to enable/disable the 10GbE FCoE Option ROM that is used by
all Onboard and IO Module 10 GbE controllers capable of FCoE support. At the present time, only the
Intel
®
82599 10 Gigabit SFP+ NIC supports FCoE for this family of server boards.
This option is grayed out and not accessible if the 10GbE PXE Option ROM is enabled or if the discs
Option ROM is enabled. It can co-exist with the 1GbE PXE Option ROM or with an Infiniband* controller
Option ROM.
If the FCoE Option ROM is disabled, and no other Option ROM is enabled, the system cannot perform
a Network Boot and cannot respond for Wake-on-LAN.