Technical Product Specification

Intel® Server Boards S4600LH2/T2 TPS
Revision 2.0
94
Color
State
Criticality
Description
is crossed within the window
Correctable memory error threshold has been reached for a failing DDR3
DIMM when the system is operating in a non-redundant mode
Amber
Solid on
Critical, non-
recoverable –
System is halted
Fatal alarm – system has failed or shutdown:
CPU CATERR signal asserted
MSID mismatch detected (CATERR also asserts for this case).
CPU 1 is missing
CPU Thermal Trip
No power good – power fault
DIMM failure when there is only 1 DIMM present and hence no good
memory present
1
.
Runtime memory uncorrectable error in non-redundant mode.
DIMM Thermal Trip or equivalent
SSB Thermal Trip or equivalent
CPU ERR2 signal asserted
BMC\Video memory test failed. (Chassis ID shows blue/solid-on for this
condition)
Both uBoot BMC FW images are bad. (Chassis ID shows blue/solid-on for
this condition)
240VA fault
Fatal Error in processor initialization:
Processor family not identical
Processor model not identical
Processor core/thread counts not identical
Processor cache size not identical
Unable to synchronize processor frequency
Unable to synchronize QPI link frequency
8.2.2 Front Panel USB Connector
The server board includes a 10-pin connector, that when cabled, can provide up to two USB ports to a front
panel. The following table provides the connector pin-out.
Table 37. Front Panel USB Connector Pin-out ("FP USB")
Signal Description
Pin#
Pin#
Signal Description
+5V
1
2
+5V
USB_N
3
4
USB_N
USB_P
5
6
USB_P
GND
7
8
GND
Key
10
NC
8.2.3 Front Panel Video Connector
The server board includes a 14-pin header, that when cabled, can provide an alternate video connector to the
front panel. When a monitor is attached to the front panel video connector, the external video connector
located on the back edge of the board is disabled. The following table provides the pin-out for this connector.
Table 38. Front Panel Video Connector Pin-out ("FP VIDEO")
Signal Description
Pin#
Pin#
Signal Description
V_IO_FRONT_R_CONN
1
2
GROUND
V_IO_FRONT_G_CONN
3
4
GROUND
V_IO_FRONT_B_CONN
5
6
GROUND
V_BMC_GFX_FRONT_VSYN
7
8
GROUND