R2000LH2/LT2 Service Guide

Hardware Installations and Upgrades
5. Remove the air duct. For instructions, see Removing the Air Duct.
Installing the Intel
®
RMM4 Lite
Locate the RMM4 Lite connector next to onboard NIC port, carefully pick up the Intel
®
RMM4
Lite module, and match the alignment pin of the module and the connector on server board.
Press to install.
Figure 63. Installing the Intel
®
RMM4 Lite
Install the Intel
®
RMM4 NIC
1. Connect the cable to the server board (see letter A).
2. Secure the module with the two screws as shown (see letter B).
3. Connect the cable to the module (see letter C).
Figure 64. Installing the Intel
®
RMM4 NIC
40 Intel
®
Server System R2000LH2/LT2 Service Guide