R2000LH2/LT2 Service Guide

Hardware Installations and Upgrades
Figure 62. Removing Intel
®
I/O Expansion Module
Installing and Removing the Intel
®
Remote Management
Module 4
Before installing or removing the Intel
®
Remote Management Module 4, please make sure following
steps are performed.
1. Ensure the AC power cord(s) are disconnected from the system.
2. Remove the system cover. For instructions, see Removing the System Cover.
3. Remove the power supply modules. For instructions, see Removing the Power Supply
Module(s).
4. Remove the PCI riser assemblies. For instructions, see Removing the PCI Riser Assembly.
Intel
®
Server System R2000LH2/LT2 Service Guide 39