R2000LH2/LT2 Service Guide

Hardware Installations and Upgrades
5. Remove the air duct. For instructions, see Removing the Air Duct.
Before Installing Intel
®
I/O Expansion Module at the Left Edge of the
Board (Optional)
1. Install the module to the provided bracket (see letter A).
2. Secure the module to the bracket with the three screws (see letter B).
3. Install the provided connector converter (see letter C).
Figure 60. Installing Intel
®
I/O Expansion Module
Installing Intel
®
I/O Expansion Module
1. Remove the screw securing the filler panel from the chassis and remove the filler panel (see
letter A).
2. Position the module over the server board, fit the front of the module into the back panel slot
(see letter B).
3. Attach the module to the server board connector (see letter C).
4. Secure the module with the two screws as shown (see letter D).
Intel
®
Server System R2000LH2/LT2 Service Guide 37