Service Guide

Hardware Installations and Upgrades
Intel
®
Server System R2000GZ/GL Service Guide 43
Removing the Intel
®
RMM4 Lite
Pull up the RMM4 Lite module to remove it from the mother board.
Removing the Intel
®
RMM4 NIC
1. Remove the two screws as shown (see letter “A”).
2. Remove the module out of the server system (see letter “B”).
Figure 69. Removing the Intel
®
RMM4 NIC
Installing and Removing a Solid State Drive
Installing a Solid State Drive
1. Place the Solid State Drive on air duct (see letter “A”).
2. Secure the Solid State Drive with the four screws (see letter “B”).
3. Connect cables (see letter “C”).
Figure 70. Installing a SSD