S2600GZ and S2600GL

Table Of Contents
Intel® Server Board S2600GZ/GL TPS On-board Connector/Header Overview
Table 32. Hot Swap Backplane Power Connector Pin-out (“HSBP PWR")
Signal Description
Pin#
Pin#
Signal Description
P12V_240VA1
5
1
GROUND
P12V_240VA1
6
2
GROUND
P12V_240VA2
7
3
GROUND
P12V_240VA2
8
4
GROUND
8.1.4
Peripheral Drive Power Connector
The server board includes one 6-pin power connector intended to provide power for peripheral devices such as
Optical Disk Drives (ODD) and/or Solid State Devices (SSD). On the server board this connector is labeled as
“ODD/SSD_ PWR”. The following table provides the pin-out for this connector.
Table 33. Peripheral Drive Power Connector Pin-out ("ODD/SSD_PWR")
Signal Description
Pin#
Pin#
Signal Description
P12V
4
1
P5V
P3V3
5
2
P5V
GROUND
6
3
GROUND
8.2
Front Panel Headers and Connectors
The server board includes several connectors that provide various possible front panel options. This section
provides a functional description and pin-out for each connector.
8.2.1
Front Panel Support
Included on the front edge of the server board is a 30-pin SSI compatible front panel header which provides for
various front panel features including:
Power/Sleep Button
System ID Button
System Reset Button
NMI Button
NIC Activity LEDs
Hard Drive Activity LEDs
System Status LED
System ID LED
Revision 2.4
83