R1000GZ and R1000GL

Intel
®
Server System R1000GZ/GL Product Family TPS
9.2 Riser Card Support
The system supports two single slot PCIe x16 (x16 lanes, x16 slot) riser cards. Each riser card is mounted to a
bracket assembly which is inserted into a riser card slot on the server board.
Figure 33. Add-in Card Support
Each riser card assembly has support for a single full height, ½ length PCIe add-in card. However, riser card
#2 may be limited to ½ length, ½ height add-in cards if either of the two SCU mini-SAS connectors on the
server board are used.
Note: Add-in cards that exceed the PCI specification for ½ length PCI add-in cards (167.65mm or 6.6in) may
interfere with other installed devices on the server board.
Figure 34. Riser Card Assembly
54 Revision 2.2