Service Guide

Hardware Installations and Upgrades
52 Intel
®
Server System R2000GZ/GL Service Guide
Installing the 3.5” Hard Drive Backplane
1. Hold the backplane only by the edges. Do not push or pull on any components on the backplane.
Position the backplane in place at the front of the server system (see letter “A”).
2. Slide the backplane into the server system guides (see letter “B”).
3. Secure the backplane with the screw (see letter “C”).
Figure 86. Installing 3.5” hard drive backplane – install the backplane
4. Insert the hard drive cage into server chassis (see letter “D”).
5. Secure the hard drive cage with the six screws (see letter “E”).
Figure 87. Installing 3.5” hard drive backplane – install the hard drive cage
6. Intall the clip to server chassis (see letter “F”).
7. With the lever open, insert the hard disk drive assembly into the chassis (see letter “G”). Push
in the lever to lock it into place (see letter “H”). Repeat step G and H to make sure all hard
drive assemblies are in place.