Service Guide

Hardware Installations and Upgrades
Intel
®
Server System R2000GZ/GL Service Guide 23
3. Rotate the front bezel anticlockwise to release the latches on the right end from the rack
handle (see letter “B”).
Figure 29. Removing the Front Bezel
Installing the Front Bezel
Note: Before installing the bezel, you must install the rack handles.
1. Lock the right end of the front bezel to the rack handle (see letter “A”).
2. Rotate the front bezel clockwise till the left end clicks into place (see letter “B”).
3. Lock the bezel if needed.
Figure 30. Installing the Front Bezel
Intel also provides an optional plastic badge for customer to use. To install the badge to the bezel,
attach the badge onto the bezel until the hooks at the rear of the badge click into the bezel.