R2000GZ and R2000GL

Intel

Server System R2000GZ/GL Product Family TPS

10.2 Riser Card Assembly

The system includes two riser card assemblies which include a riser card bracket and a riser card. The riser

card bracket will accept riser cards with up to three add-in card slots

Figure 49. Riser Card Assembly

Depending on the riser card option installed, the system can support up to four full height full length add-in

cards (top and middle slots on each riser) and two full height ½ length add-in cards (bottom slot on each riser).

Note: Add-in cards that exceed the PCI specification for ½ length PCI add-in cards (167.65mm or 6.6in) may

interfere with other installed devices on the server board when installed in the bottom add-in card slot.

Two card guide brackets on the air duct provide support for Full Height / Full Length add-in cards when

installed in either the middle or top add-in card slots of each installed riser card assembly.

Figure 50. Full Height / Full Length Add-in Card Support

Revision 2.2