R2000GZ and R2000GL

Intel
®
Server System R2000GZ/GL Product Family TPS
Table 1. System Feature Set
Server System
Integrated Server Board
Intel
®
Server System R2000GZ product family Intel
®
Server Board S2600GZ
Intel
®
Server System R2000GL product family Intel
®
Server Board S2600GL
Feature
Description
Processor Support

Support for one or two processors:
o Intel
®
Xeon
®
processor E5-2600 product family with TDP support up to 135 W
1,2
o
Intel
®
Xeon
®
processor E5-2600 v2 product family with TDP support up to 130 W
Memory
 S2600GL - 16 DIMM slots – 2 DIMMs / Channel – 4 memory channels per processor
 S2600GZ - 24 DIMM slots – 3 DIMMs / Channel – 4 memory channels per processor
 Unbuffered DDR3 (UDIMM), Registered DDR3 (RDIMM), and Load Reduced DDR3 (LRDIMM)
 Memory DDR3 data transfer rates of 800, 1066,1600, and 1866
3
MT/s
 DDR3 standard I/O voltage of 1.5V and DDR3 Low Voltage of 1.35V
Chipset Intel
®
C602 chipset with support for optional Storage Option Select keys
External I/O
connections
 Video – Back Panel + Front Panel on Non-Max Hard drive SKUs
 RJ-45 Serial- A Port
 Four RJ-45 Network Interface Connectors supporting 10/100/1000Mb
 USB 2.0 connectors - 3 on back panel + 2 on front panel on non-max hard drive SKUs
Internal I/O
connectors / headers
 One Type-A USB 2.0 connector
 One DH-10 Serial-B port connector
I/O Module
Accessory Options
The following I/O modules utilize a single proprietary on-board connector. An installed I/O module can
be supported in addition to standard on-board features and any add-in expansion cards.
 AXX4P1GBPWLIOM – Quad port 1 GbE based on Intel® Ethernet Controller I350
 AXX10GBTWLIOM – Dual RJ-45 port 10GBase-T I/O Module based on Intel® Ethernet Controller
x540
 AXX10GBNIAIOM – Dual SFP+ port 10GbE module based on Intel® 82599 10 GbE controller
 AXX1FDRIBIOM – Single Port FDR 56GT/S speed InfiniBand module with QSFP connector
 AXX2FDRIBIOM – Dual port FDR 56GT/S speed infiniband module with QSFP connector
System Fans
 Five managed system fans
 One power supply fan for each installed power supply module
Riser Cards
Support for two riser cards. Each riser card slot has support for the following riser card options:
 3-slot PCIe Riser Card: (Slots 1 & 2) – PCIe x16 slot, x8 lanes, (Slot 3) – PCIe x8 slot, x8 lanes
 2-slot PCIe Riser Card: (Slot 1) – PCIe x16 slot, x16 lanes, (Slot 2) – PCIe x8 slot, x8 lanes
 3-slot PCIx/PCIe Riser Card: (Slots 1 & 2) – PCIx 64-bit, (Slot 3) – PCIe x8 slot, x8 lanes
Video
 Integrated 2D Video Controller
 16 MB DDR3 Memory
On-board storage
controllers and
options
 One eUSB 2x5 pin connector to support 2mm low-profile eUSB solid state devices
 Two 7-pin single port AHCI SATA connectors capable of supporting up to 6 GB/sec
 Two SCU 4-port mini-SAS connectors capable of supporting up to 3 GB/sec SAS/SATA
o SCU 0 Port (Enabled standard)
o SCU 1 Port (Requires Intel RAID C600 Upgrade Key)
 Intel
®
Integrated RAID module support (Optional)
 Intel
®
RAID C600 Upgrade Key support providing optional expanded SATA / SAS RAID capabilities
Security
Intel
®
TPM Module - AXXTPME5 (Accessory Option)
Server Management

Integrated Baseboard Management Controller, IPMI 2.0 compliant
 Support for Intel® Server Management Software
 Intel
®
Remote Management Module 4 Lite – Accessory Option
 Intel
®
Remote Management Module 4 Management NIC – Accessory Option
4 Revision 2.2