R1000GZ and R1000GL

Intel
®
Server System R1000GZ/GL Product Family TPS
Figure 27. AXXBBU09 and AXXRFMBU2 Installation
For additional product information, please reference the following Intel document:
• Intel Integrated RAID Module RMS25PB040, RMS25PB080, RMS25CB040, and RMS25CB080
Hardware / Installation Users Guide
• Intel Integrated RAID Module RMT3PB080 and RMT3CB080 Hardware / Installation Users Guide
• Intel Integrated RAID Module RMS25KB040, RMS25KB080, RMS25JB040, and RMS25JB080
Hardware / Installation Users Guide
• Intel
®
Raid Maintenance Free Backup Unit AXXRMFBU2 User’s Guide
7. Front Control Panel and I/O Panel Overview
All system configurations will include a Control Panel on the front of the system providing push button system
controls and LED indicators for several system features. Systems configured with four 3.5” hard drive bays will
also include an I/O Panel providing additional system I/O features. This section describes the features and
functions of both front panel options.
7.1 I/O Panel Features
Label
Description
A
Video connector
B
USB ports
Figure 28. Front I/O Panel Features
A – Video connector – The front I/O Panel video connector gives the option of attaching a monitor to the front
of the system. When BIOS detects that a monitor is attached to the front video connector, it disables the video
signals routed to the on-board video connector on the back of the system. Video resolutions from the front
video connector may be lower than that of the rear on-board video connector. A short video cable should be
used for best resolution. The front video connector is cabled to a 2x7 header on the server board labeled “FP
Video”.
Revision 2.2
47