Intel RMFBU2/SSD Mounting Bracket A2UBKTMFBUSSD Users Guide

Intel
®
RMFBU2/SSD Mounting Bracket A2UBKTMFBUSSD User’s Guide 1
The Intel
®
RMFBU2/SSD Mounting Bracket (A2UBKTMFBUSSD) is designed as an accessory for the
Intel
®
Server System R2000GZ/GL Product Family and the Intel
®
Server System R2000BB Product
Family. It can support upto three Intel
®
RAID Maintenance Free Backup Units (AXXRMFBU2) or upto
two Solid State Drives (SSDs).
Note: Due to system thermal limitations, other available Intel RAID battery backup accessory
kits cannot be supported with the A2UBKTMFBUSSD kit.
To Install Intel
®
RAID Maintenance Free Backup Unit AXXRMFBU2
1. Remove the top cover from the server chassis (see instruction from the Quick Installation
User’s Guide),
2. Position the bracket on top of the power supply cage (see letter “A”).
3. Secure the bracket to the chassis with three screws (see letter “B”).
Note: The two 6-32 flat head screws are for the side wall and the one 4-40 screw is for the
rear panel.
Figure 1. Install the bracket to server chassis
4. Align the tabs on the plastic RMFBU2 holder with the slots on the bracket (see letter “C”).
Slide the plastic RMFBU2 holder until the tabs engage with the slots on the bracket (see
letter “D”).
Figure 2. Install RMFBU2 to the bracket