Specifications

Monthly Specification Update

26. The Intel® Xeon Phi™ Coprocessor PCI Express* Card Status Sensor may show

"Unknown" 12

27. The Intel® Xeon Phi™ Coprocessor PCI Express* Card sensors numbering may

not be consistent with riser slot numbering ............................................................................ 13

28. The Activity/Link LED of the Intel

I/O Expansion Modules may not be solid green13

29. Intel® FDR InfiniBand* ConnectX* -3 I/O Module AXX2FDRIBIOM port 2 may have

interconnect problem with Mellanox* 1m FDR or 7m SFP+ passive copper cables ................ 14

30. BMC becomes temporarily unresponsive across the LAN or the Integrated BMC

Web Console may disconnect, when performing DC power cycling. ...................................... 14

31. The PXE boot and iSCSI boot settings may not be saved after reboot ................. 14

32. VMware ESXi* installation failure when detecting Network Adapters .................... 15

33. When using the 3ware® RAID controller cards, the system may hang after creating

RAID logic volume with BIOS R02.01.0002 or R02.02.0002. ................................................. 15

34. Updated Technical product specification (TPS) rev2.3 -- Remove the “Battery

Failure” from Table37 and Table51. ...................................................................................... 16

35. Windows Server 2008* R2 installation on Intel® Xeon® E5-2600 v2 processor

based server boards may fail with an accessory 2U PCI-X riser A2ULPCIXRISER installed.. 16

36. System will hang during POST if two CPUs are mismatched. .............................. 16