Specifications

Hardware Installations and Upgrades
58 Intel
®
Server System R2000BB Service Guide
Figure 89. Removing 2.5” hard drive backplane – remove the stiffener
4. Remove the three screws to release the hard drive cage (see letter “C”).
5. Slide the hard drive cage out of the server chassis (see letter “D”).
Figure 90. Removing 2.5” hard drive backplane – remove the hard drive cage
6. Remove the screw from the backplane board (see letter “E”).
7. Hold the backplane board only by the edges and slide the backplane board in the direction
shown to release it (see letter “F”). Remove the backplane board from the four hooks and pull
out of the hard drive cage (see letter “G”).