Specifications

Hardware Installations and Upgrades

46 Intel

Server System R2000BB Service Guide

Removing the Intel

RMM4 Lite

Pull up the RMM4 Lite module to remove it from the mother board.

Removing the Intel

RMM4 NIC

1. Remove the two screws as shown (see letter “A”).

2. Remove the module out of the server system (see letter “B”).

Figure 69. Removing the Intel

RMM4 NIC

Installing and Removing a Solid State Drive

Installing a Solid State Drive

The system can support one internal fixed mount 2.5” Solid State Drives (SSD). The Solid State

drive is attached to the top side of the air duct.