Specifications

Hardware Installations and Upgrades

Intel

Server System R2000BB Service Guide 43

4. If no device will be installed in this location, install a filler panel in this location.

Installing and Removing Intel

I/O Expansion Module

Installing Intel

I/O Expansion Module

1. Squeeze the sides of the filler panel to disengage it from the server system back panel and

remove it (see letter “A”).

2. Position the module over the server board, fit the front of the module into the back panel slot

(see letter “B”).

3. Attach the module to the server board connector (see letter “C”).

4. Secure the module with the three screws as shown (see letter “D”).

Figure 64. Installing Intel

I/O Expansion Module

Removing Intel

I/O Expansion Module

1. Remove the three screws as shown (see letter “A”).

2. Remove the module out of the server system (see letter “B”).