Specifications

Hardware Installations and Upgrades
Intel
®
Server System R2000BB Service Guide 41
Figure 59. Removing the PCI Riser Card
Installing a PCI Riser Card
1. Place the riser card onto the retention pins (see letter “A”).
2. Slide the riser card in the direction shown to lock it into place (see letter “B”)
3. Secure the riser card using the screw (see letter “C”).
Figure 60. Installing the PCI Riser Card
Installing and Removing a Slimline Optical Drive
Caution: The slimline optical drive is NOT hot-swappable. Before removing or replacing the drive,
you must first take the server out of service, turn off all peripheral devices connected to the system,
turn off the system by pressing the power button, and unplug the power cord from the system or
wall outlet.
To maintain proper system cooling, a filler panel must be installed if you do not install a device at
this location.