Specifications

Server System Features
Intel
®
Server System R2000BB Service Guide 11
operation.
Jumper Name Jumper Purpose
A Serial Jumper (J3A1)
If pins 1-2 are selected, the serial-A configuration is in Data Carrier Detect
(DCD) mode. These pins should be selected on 2-3 for normal system operation.
B BMC Force Update (J2D1)
If pins 2-3 are selected, the Integrated BMC Force Update Mode is enabled.
These pins should be selected on 1-2 for normal system operation.
C BIOS Recover (J7D2)
If pins 2-3 are selected, the system can only boot from EFI-bootable recovery
media with the recovery BIOS image. The main system BIOS will not boot.
These pins should be selected on 1-2 for normal system operation.
D Password Clear (J7E1)
If pins 2-3 are selected, administrator and user passwords are cleared within five
to ten seconds after the system is powered on. These pins should be selected on
1-2 for normal system operation.
E ME Force Update (J7E2)
If pins 2-3 are selected, the ME Force Update Mode is enabled. These pins
should be selected on 1-2 for normal system operation.
F BIOS Default (J7E3)
If pins 2-3 are selected, the BIOS settings are cleared on the next reset. These
pins should be selected on 1-2 for normal system operation.
Figure 12. Configuration Jumpers
Peripheral Devices
The Intel
®
Server System R2000BB provides locations and hardware for installing hard drives, CD-
ROM drive, or DVD-ROM drive. The following figure shows the available options.
A Hard Disk Drive Bays
B Video Port
C USB Ports
D Front Control Panel
E Slimline Optical Drive Bay
F System Label Pull-out
Figure 13. Optional Peripherals (16x2.5-inch hard drive bays as shown)