Specifications

Server System Features
Intel
®
Server System R2000BB Service Guide 3
Caution: THE MAXIMUM RECOMMENDED SERVER WEIGHT FOR THE RACK RAILS CAN BE
FOUND at http://www.intel.com/support/motherboards/server/sb/CS-033655.htm
. EXCEEDING THE
MAXIMUM RECOMMENDED WEIGHT OR MISALIGNMENT OF THE SERVER MAY RESULT IN
FAILURE OF THE RACK RAILS HOLDING THE SERVER. Use of a mechanical assist to install and
align server into the rack rails is recommended.
Power Supply
Options
The server system can have up to two power supply modules installed, providing support for the
following power configurations: 1+0, 1+1 Redundant Power, and 2+0 Combined Power.
• Three available power supply options:
o AC 460W Gold
o
AC 750W Platinum
Storage Bay Options
• 8x – 3.5” SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support
• 12x – 3.5” SATA/SAS Hot Swap Hard Drive Bays
• 8x – 2.5” SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support
• 16x – 2.5” SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support
• 24x – 2.5” SATA/SAS Hot Swap Hard Drive Bays
Supported Rack
Mount Kit Accessory
Options
• Tool-less rack mount rail kit – Intel Product Code – AXXPRAIL
• Value rack mount rail kit – Intel Product Code – AXXVRAIL
• Cable Management Arm – Intel Product Code – AXX1U2UCMA (*supported with AXXPRAIL
only)
• 2-post fixed mount bracket kit – Intel Product Code – AXX2POSTBRCKT