Service Guide

Hardware Installations and Upgrades
42 Intel
®®
Server System R1000SP Service Guide
Figure 72. Replacing the Backup Battery
4. Dispose of the battery according to local ordinance.
5. Remove the new lithium battery from its package, and, being careful to observe the correct
polarity, insert it in the battery socket.
Note: You will need to run the BIOS Setup to restore the configuration settings to the RTC.
Replacing a System Fan
Note: The system fans cannot be hot swapped. System power must be removed when replacing a system
fan.
1. Disconnect the fan cable (see letter A).
2. Pull system fan straight up to remove it from the fan holder (see letter B).
Figure 73. Replacing a system fan
3. Replace the system fan.