Service Guide

Hardware Installations and Upgrades
12 Intel
®®
Server System R1000SP Service Guide
2 Hardware Installations and Upgrades
Before You Begin
Before working with your server product, pay close attention to the “Safety Information” at the
beginning of this manual.
Note: Whenever you service the system, you must first power down the server and unplug all peripheral
devices and the power cord.
Tools and Supplies Needed
 Phillips* (cross head) screwdriver (#2 bit)
 Needle nosed pliers
 Anti-static wrist strap and conductive foam pad (recommended)
System Reference
All references to left, right, front, top, and bottom assume the reader is facing the front of the
chassis as it would be positioned for normal operation.
Cable Routing
When you add or remove components from your server system, make sure your cables are routed
correctly before reinstalling the server system cover. Use caution to make sure no cables or wires
are pinched and that the airflow from the fans is not blocked. Use the following figures to
determine the correct cable routing.
Note: Red lines are for power connection and the dotted lines are for optional device connection.