S2600GZ and S2600GL

Table Of Contents
Intel® Server Board S2600GZ/GL TPS BIOS Setup Utility
Option Values: <Available BEV Devices>
Help Text:
Set system boot order by selecting the boot option for this position.
Comments: Choose the order of booting among BEV Devices by choosing which available
BEV Device should be in each position in the order.
Back to [BEV Device Order Screen] — [Boot Options Screen
]
12.2.5.6
Add EFI Boot Option
The Add EFI Boot Option screen allows the user to add an EFI boot option to the boot order. This screen is
only available when there is at least one EFI bootable device present in the system configuration. The “Internal
EFI Shell” Boot Option is permanent and cannot be added or deleted.
To access this screen from the Main screen, select Boot Options > Add EFI Boot Option. To move to
another screen, press the <Esc> key to return to the Boot Options screen, then select the desired screen.
Boot Options
Add EFI Boot Option
Add boot option label [Enter label]
Select File system <Available Filesystems>
Path for boot option [Enter boot path]
Save
Figure 64. Add EFI Boot Option Screen
Screen Field Descriptions:
1. Add boot option label
Option Values: [Enter label]
Help Text:
Create the label for the new boot option.
Comments: This label becomes an abbreviation for this Boot Path.
Back to [Add EFI Boot Option Screen] — [Boot Options Screen
]
2. Select File system
Option Values: <Available Filesystems>
Help Text:
Select one filesystem from this list.
Comments: Choose the filesystem on which this boot path resides.
Back to [Add EFI Boot Option Screen] — [Boot Options Screen
]
Revision 2.4
187