S2600GZ and S2600GL

Table Of Contents
Intel® Server Board S2600GZ/GL TPS On-board Connector/Header Overview
Table 43. Multiport SAS/SATA Connector Pin-out ("SCU_1 (4-7)")
Signal Description
Pin#
Pin#
Signal Description
GROUND
A1
B1
GROUND
SAS4_RX_C_DP
A2
B2
SAS4_TX_C_DP
SAS4_RX_C_DN
A3
B3
SAS4_TX_C_DN
GROUND
A4
B4
GROUND
SAS5_RX_C_DP
A5
B5
SAS5_TX_C_DP
SAS5_RX_C_DN
A6
B6
SAS5_TX_C_DN
GROUND
A7
B7
GROUND
TP_SAS2_BACKPLANE_TYPE
A8
B8
SGPIO_SAS2_CLOCK
GROUND
A9
B9
SGPIO_SAS2_LOAD
SGPIO_SAS2_DATAOUT
A10
B10
GROUND
SGPIO_SAS2_DATAIN
A11
B11
PD_SAS2_CONTROLLER_TYPE
GROUND
A12
B12
GROUND
SAS6_RX_C_DP
A13
B13
SAS6_TX_C_DP
SAS6_RX_C_DN
A14
B14
SAS6_TX_C_DN
GROUND
A15
B15
GROUND
SAS7_RX_C_DP
A16
B16
SAS7_TX_C_DP
SAS7_RX_C_DN
A17
B17
SAS7_TX_C_DN
GROUND
A18
B18
GROUND
GROUND
MTH1
MTH5
GROUND
GROUND
MTH2
MTH6
GROUND
GROUND
MTH3
MTH7
GROUND
GROUND
MTH4
MTH8
GROUND
8.3.3
Internal Type-A USB Connector
The server board includes one internal Type-A USB connector labeled “USB 2” and is located near the back
edge of the board next to the Riser 1 slot. The following table provides the pin-out for this connector.
Table 44. Internal Type-A USB Connector Pin-out ("USB 2")
Signal Description
Pin#
P5V_USB_INT
1
USB2_P2_F_DN
2
USB2_P2_F_DP
3
GROUND
4
8.3.4
Internal 2mm Low Profile eUSB SSD Connector
The server board includes one 10-pin 2mm low profile connector with an intended usage of supporting low
profile eUSB SSD devices. On the server board this connector is labeled “eUSB SSD”. The following table
provides the pin-out for this connector.
Table 45. Internal eUSB Connector Pin-out ("eUSB SSD")
Signal Description
Pin#
Pin#
Signal Description
P5V
1
2
NOT USED
USB2_P0_DN
3
4
NOT USED
USB2_P0_DP
5
6
NOT USED
GROUND
7
8
NOT USED
NOT USED
9
10
LED_HDD_ACT_N
Revision 2.4
89