R2000GZ and R2000GL

Intel
®
Server System R2000GZ/GL Product Family TPS
6.3 Optical Drive Support
Systems configured with eight 3.5” hard drive bays or up to sixteen 2.5” hard drive bays also include support
for an optical drive bay ‘A’ as illustrated below.
Figure 32. Optical Drive Support
A 2x3 pin power connector on the server board labeled “ODD/SSD PWR” is designed to provide power to two
SATA SSDs or a single SATA SSD and a SATA optical drive. Using the supplied power harness, one power
lead is routed to the optical drive bay, and two longer power leads are routed to the SSDs. SATA signals for
one SSD and one optical drive or two SSDs, are cabled from the two white single port AHCI SATA connectors
on the server board.
Revision 2.2
49