R2000GZ and R2000GL

Intel
®
Server System R2000GZ/GL Product Family TPS
Figure 24. System Fan Assembly
The system fan assembly is designed for ease of use and supports several features.
 Each fan is hot-swappable.
 Each fan is designed for tool-less insertion and extraction from the fan assembly. For instructions on
installing or removing a fan module, see the Intel
®
Server System R2000GZ/GL Service Guide.
 Fan speed for each fan is controlled by the integrated BMC on the server board. As system thermals
fluctuate high and low, the integrated BMC firmware will increase and decrease the speeds to specific
fans within the fan assembly to regulate system thermals.
 Each fan has a tachometer signal that allows the integrated BMC to monitor their status.
 On top of each fan is an integrated fault LED. Platform management illuminates the fault LED for the
failed fan.
 Each fan has a10-pin wire harness that connects to a matching connector on the server board.
Fan-1
Fan-2
Fan-3
Fan-4
Fan-5
Figure 25. Server Board System Fan Connector Locations
36 Revision 2.2